Plastic-coated metal hoses play a vital role in our day, is steel, petroleum, chemical, etc., common and bad presence has a lot of dust, flammable and explosive gas environment is also used.
All are to stop the problems existing in the use of plastic-coated metal hoses, according to the factors of the model measures, the earlier continuous. Suppose a solution to the following problem. Plastic-coated metal hose ruptured what should I do?
1. Reorganization
Saw off to break the plastic-coated metal hose. Find a view on replacing the hose and approximate length and breaking the hose, sawing off the hose joint, welding the hose to the metal hose connection instead of the hose; Clean the welded pipe before use.
2. Bones
To break the plastic-coated metal hose place wipe clean, remove the broken position, insert the steel "bone" self-denial is the hose blocked, in an emergency, you can also use the same steel pipe diameter and pipe bone diameter when the "bone"); Hose and "bone" clamp with self-negating steel clamp (in case of emergency, use 8 instead of self-negating steel clamp). Clean the connected plastic-coated metal hose after use.
3. Dressing method
Plastic coated metal hose coating is a commonly used glue in engineering machinery, and 2-3 layers of oil-resistant rubber glue around the place where the width and length of the broken part are 2 to 3 times, and each layer should be coated with glue); 12 lines around good oil resistant rubber, condensation.