Laminated sheet is made of steel material, straightening processing technology after heat treatment, the whole dense internal and external circular grinding, flat grinding, after the factory processing to the finished product!
Request process: overall smooth, low friction, and in the temperature of more than 200 degrees, try not to touch or less sticky hot melt glue!
Product use:
Melaleuca roll consists of many melaleuca, multi-layer roll 1.2 kg/cm, the weight of each melaleuca is 0.4 kg, and the melaleuca roll process must be maintained to adapt to the tread pressing out of the groove. After each layer polishing, the coating bonding force is high, the finish is high, the influence of non-stick coating reduces the friction resistance between thousands of layers, and realizes the free movement of the thousand layers. Pressing tread, inner shaft can not contact mela, in order to avoid damage to the groove roll, it is better to mela and groove roll top edge left a few millimeters above. When the pressure is appropriate, the rollers on both sides of the multilayer sheet must be in the same straight line, and the position of the block roller should be adjustable.